HEATFLOW S5 - FORCED AIR SYSTEM
AC02110

**Heatflow S5 is compatible with specific models, see manual for details.** *Any installation must be done according to the data and drawings detailed in the owner’s manual.* *Wood stove is not included, it must be purchased separately.* Designed to optimize your wood stove’s performance, the Heatflow S5 is a galvanized steel cabinet that can be installed on top of your appliance to efficiently distribute heat to other rooms in your home. It's a long-lasting and safe way to get the most out of your auxiliary heating source! **Designed to efficiently recover and distribute the heat from your stove:** • The system recovers heat from 4 sides of the stove (left, right, rear and top). The heat radiation in front of the appliance is not affected – you can still admire the fire and heat the room where the stove is installed. • It is possible to install up to 4 outlets (minimum 1) to distribute the heat to other rooms. The design is compatible with standard metal grilles available at hardware stores. • The variable speed blower (included) with a power of 400 CFM has 3 operating modes (Auto, Off and Manual). • The thermodisc (included) avoids distributing cold air by activating the blower only when the temperature is high enough. **Durable and safe solution:** • The heat evacuation louvers, located on the top of the cabinet, allow the stove to be maintained at safe temperatures when the blower is not in operation (for example during a power outage). • Simplified design for assembly and installation: 6" round outlet to adapt to any galvanized rigid pipe (available at hardware stores), can be assembled by one person, detailed instruction sheet.